3December

3December
Maya Video Products, Inc. published an article in the Westchester County Business Journal, on December 3, 1990, which contains some errors. I worked for this company, as a consultant, at the time, and was the only computer 3D modeler employed there. See: http://www.highbeam.com for more information.

Wednesday, December 5, 2012

Engineering 1988-1990

http://main.abet.org/aps/AccreditedProgramsDetails.aspx?OrganizationID=416
According to this webpage, Polytechnic Institute of New York University has had an ABET accredited program in Computer Engineering since 10/1/1989. 
The School of Engineering and Department of Computer Science at Pratt Institute closed and gave out their last degrees in May, 1993, according to publications from Pratt Institute. 
The Department of Computer Graphics gave out their first degrees in May, 1990, according to my knowledge.
Polytechnic University had a School of Engineering that took students from Pratt, to finish their degree, starting when?  I was told that the School of Engineering was closing in 1988, when I first entered Pratt Institute.  So, I didn't even inquire about entering that school.
10/1/89 was when Isaac Victor Kerlow, M.S., Chair of the Computer Graphics program at Pratt, announced the name of the new degree that we had been working toward for over a year, in a thesis handout. 
What he had been calling a "Master of Computer Graphics" was, as of 10/1/89, or around there, a "Master of Fine Arts (Computer Graphics)". 
I never took a single  Fine Arts class while enrolled at Pratt Institute.  As of 10/1/89, I was starting my thesis work and all of my other credits had been fulfilled.  With no previous theses completed or previous graduates, and few if any comparable Computer Graphics programs in existence, I only knew Architecture, and completed original Architectural work as part of my thesis. 

Thesis on www.youtube.com:
http://www.youtube.com/watch?v=nAsqUYbyJEA&feature=plcp


This woman used my name to advance:
http://www.design.upenn.edu/news/remembering-visionary-architect-and-theorist-anne-tyng-phd75

I knew Anne Tyng, in 1990, when I was working on my thesis.  I, just, visited her twice in Philadelphia, at her house, and, she showed me the Architecture Department, at the University of Pennsylvania, on one of these two visits.

Tuesday, December 4, 2012

Community college and the Associates degree 1978-1983

http://www.aol.com/article/2014/05/19/everything-must-go-silverdomes-assets-for-sale/20888342/?icid=maing-grid7%7Cmaing11%7Cdl1%7Csec1_lnk2%26pLid%3D478206


http://www.donovanhatem.com/attorney/sue-e-yoakum/ -  Kansas State University B. of Architecture, class of 1983, classmate Sue Yoakum, R.A., Attorney at law is employed here, according to this website.  I don't want to insult you, Sue, but, I entered with scholarships, sat in the rear of the class, worked five jobs while a student at Kansas State University, finished with more  

Unlicensed professional practice - Architecture 1995-1996-present

1996:
I found the names and addresses of those I knew who were working at Fru-Con Engineering, Inc. in 1995, who were licensed:
Mr. Robert Rice, 166 Flamm, Silex, Mo. (Lincoln County), Mo.  63377 - licensed since 1991;   Mr. Jerome Ribaudo, 3121 Rocky Ridge Drive, Glencoe, Mo.  63038  - licensed since 1989.
 
Jerome Ribaudo had worked in the Middle East, I was told, and, he had a baby, and his wife had worked at Washington University (School of Medicine).  He was building his own house in 1995, and had his own home office in 1996, when I was invited to come over and see him there.
 
Robert Rice is the nearest licensed Architect geographically to my parents' house in Wentzville.  I don't know when he moved there, but, there weren't any there in 1991, when I moved back from New York.  He had an Open House at his acreage in Lincoln County, near Troy and Hwy. 40/64, when I was first employed at Fru-Con, but, I declined the invitation, on the basis of sexual intonations in a home invitation.  I never met his wife and know he did not have any kids.  He decided on a license in New York shortly after I was let go, around 1997, if I remember correctly.
 
I invited Mr. Cliff Parmer, R.A. out to lunch shortly after I was let go, to discuss work and a reference (not to mention my time sheets).  He declined on the basis of sexual intonations? 
 
Who do you think has appeared wherever I am, on the road, or at work, since July, 1996?   You know them.
 
 ADDITIONAL:  January 29, 2013
Most importantly, women working in Architecture are small in number, especially in the midwest.  For that reason, there are women who CLAIM TO BE WORKING IN ARCHITECTURE and/or PLANNING, and, are in fact, not educated or employed in Architecture, but, have worked in Interior Design.  Interior Design is the design of the interiors of buildings, and does not include the structural design.  This fact can be overlooked when hiring, because of the widespread usage of nepotism in the job market - if you are related to an Architect, you can work as an Architect.  In my case, I have an Aunt who is educated as an Interior Designer, and went through the University of Missouri- Columbia program in Interior Design, and graduated.  She was licensed in Interior Design - grandfathered in when licensure was started.  At that time, I had graduated with a degree in Architecture, from Kansas State University, and needed work.  I found work at Hospital Building and Equipment Company, or HBE Corporation, in Creve Coeur, in 1987, and worked there, as a Graduate Architect.  That was when I became aware of a Barbara Fitzgerald, Interior Designer, who was working for a male Architect's relative's Interior Design firm.  He asked me if I knew a Barbara Fitzgerald, and said that this company had hired another woman, of the same name - Barbara Fitzgerald -  they weren't too happy with, for some reasons.  I did not know Barbara Fitzgerald at any job during this time - I was busy with my Architectural work, and trying to pay off bills.   I do not know this woman, at all.  In 1987, she was living someplace temporarily, because her place of residence was Florida, and found work here, in St. Louis, by using my name.  I never used hers.  I don't know the woman. 

ADDITIONAL INFORMATION - published July 1, 2002, in the "Dimensions" newsletter, by the Missouri Board for Architects, Professional Engineers, Professional Land Surveyors and Landscape Architects:

"Kathleen A. Wa r m a n ,  owner of  W a r m a n  D e s i g n  G r o u p  A r c h i t e c t s located in Kansas City, Missouri, has been appointed by Governor Bob Holden to serve as a member of the Architectural Division of the Missouri Board for Architects, Professional Engineers, Professional Land Surveyors and Landscape Architects.
Ms. Warman's appointment went into effect on May 1, 2002. Ms. Warman has been licensed as an architect in Missouri since October 1, 1990. She is also currently licensed in 16 other states and has more than 18 years of architectural experience. Ms. Warman attended the University of Kansas and received a Bachelor of Environmental Design in 1983 followed by a Bachelor of Architecture in 1988. She is active with the National Council of Architectural Registration Boards, American Institute of Architects, University of Kansas Alumni Association, Williams Educational Fund, Briarcliff Elementary PTA, and the Kansas City AIA Education Committee for which she Chairs. She is also a Board Member of the Northgate PTSA . Missouri statute provides that Board Members shall serve a term of four years or until his/her successor is appointed by the Governor.
Ms. Warman was appointed on April 23, 2002 to replace Victoria L. Noteis, Kansas City, Missouri whose term expired on September 1, 2000.
 
 
Board for Architects, Professional Engineers, Professional Land Surveyors & Landscape Architects"
 

 
 

 
I remember reading this, because, at that time, I had married in 2000.

There's nothing in this woman's experience and membership that is any differently qualified than mine - except she is/was a member of the "Briarcliff Elementary PTA".  I still have no idea what the "Northgate PTSA" is, or what Architecture has to do with the "Williams Educational Fund".  The 16 licenses, in other states, are around the country and only count for more money, since, if you have one, all you have to do is fill out paperwork and get another, after you pay the fee. 

And guess, what, the PTA brochure appeared.  I saw the PTA brochures at the FIRST Robotic Competition at the Edward Jones Dome downtown, St. Louis,  January, 2012.   I have a copy of that brochure.  Just, for your information, the PTA is the Parent-Teacher Association, which keeps the adults involved in their children's education, starting from a young age.  Now, who does not know that or has never heard of the PTA? 

That's a public organization - anyone can join, even those who don't have children.

 

Fru-Con Engineering, Inc. and MicroStation software 1995-1996

I was hired, after two interviews, at Fru-Con Engineering, Inc., in July, 1995, through PDS Technical Services, Inc. and Mr. Jim O'Daniel.  I interviewed with Kristen Stabler, R.A. in New York, Mr. Robert Rice, a W.U. grad and head of the Arch. Dept., and Mike Ratliff, who I thought was a R.A. in Mo., but, I found out, much later, that he was the nephew of one of the partners of the same last name.  I interviewed the second time with Cliff Parmer, R.A., who hired me at the same wage I had made at M.K.-Ferguson Group, where I had worked on contract 6/94-2/95, which was $15/hour, no benefits.  I did not work overtime at M.K.-Ferguson Group. 
Because of my knowledge of computers and software and Windows, I was able to go to work right away, and produce drawings for a large project in St. Charles County, at MicroElectronic Materials Corporation.  I had a side table, that could be used for drafting, but, was covered with blueprints, that were redlined or previously completed.  I never drew a single line while working at Fru-Con.  But, this is not so bad - I noticed that many did not draw a single line on a computer, either, while working as Architects or Engineers at Fru-Con.  They did  not buy a book to learn  how to do this, nor, did they show an interest in having any software on a computer on their desk.  In fact, they had a schedule that included:  coffee, then, a soda;  then, read the daily paper;  then, lunch, maybe with someone in the firm;  talk to the Secretary;  then,  write a letter or call someone for some reason;  or get together in a meeting after grabbing some drawings.  I never had any direction from any of the people who hired me in how to produce any drawings with any software or by hand, or where to find answers to any Architectural or Engineering question in the office, such as where the codes were located or where anyone sat, in fact.  Cliff Parmer came over to my desk every day and talked really loud over my head so that everyone in the area could hear what he said, telling me nothing but just letting everyone know he was there.  Then, just before Christmas, he called me over with Joe Ruma and sat down at a table and stamped all of the drawings with his Architectural stamp in front of me, and signed them all.  He and Joe, then, went on Christmas break for about 10 days, letting me sit with the computer and drawings, which made me so sick I was hospitalized.  I was not paid extra to stay over the Christmas holiday.  I was not paid anything to have an Architectural license or a Master's degree, since only Robert Rice had a Master's degree, and he had needed this in order to be licensed because he had gone through Wash. U.  Of course, he needed a lot of money, too, because that took 6 years at a high priced private university, and his wife needed a new coat, car, and dinner out, after living on their ranch out there in the country.  I could not have imagined that he would just call me in, in June, 1996, to the office of Mike Ratliff's uncle (whom I never met before that day), after lunch, and tell me to "get my things and go".  Well, I had a question about what that meant.  I had heard about the guy who was called into that office and was just going to move to "Dad's condo in Florida"  for awhile.  That guy didn't have a license in anything nor a Master's degree, but, he had a wife who needed a new car.  I had given a ride to a guy who was hired from California or somewhere, and put up at a hotel on Manchester Road, near Clarkson Road, for a week or so, from the office back to the hotel.  I heard about the woman who was told to stay out in West St.  Louis County, since the office was located there.  Well, those were people who were told little, but, snob stories about what THE HUMAN RESOURCES AND PARTNERS considered the places to live.  West County IS West County.  If you don't know that you could end up hurt bad.  So, those people just went away somewhere after a short time - I guess back to where they came from, such as California - you know, because they get the SEISMIC topics on the exam.  Well, I found that the partners can't even write a decent letter to a client. I found that photography is the same as Architecture, if your Dad is employed at the same firm you are, at the same time.  I found that being married to some guy who's an Engineer entitles you to a seat in the firm where you don't have to do anything, or look at anything, or know anybody, but, your husband.  I found that having your sister employed there puts you, and her, at risk of being hurt, by other women employed there, if you're a guy.  I'm still trying to figure that one out.  Well, there was one floor I never even saw while working there for nine or ten months, until June, 1996.  Some obese guy came in and sat near me, in the next booth, and wanted to know where Wentzville is located, which is where I am from, but, appears on a lot of street signs because is located at the intersection of two highways - I-70 and I- 40/64.  There was a young Asian woman who had just had a baby, I was told, who was from California or somewhere out west, who sat in that same seat, later.  She didn't even know that some in the company went out for lunch, across Manchester Road, to a Chinese restaurant.  There was one guy who came in, from New York City, who said he was near bankruptcy, and needed work.  The regular paying employees didn't lift a hand to know MicroStation or the jobs that were being produced while I was there.  Joe Ruma was thought to be something with a computer, but, he did not obtain a license until years later - you know what he had, do I have to repeat myself:  a wife and a baby, who needed a bigger house in Clayton.  I drove a car that I couldn't afford to purchase every day to work, lived in a house that I couldn't afford to purchase the entire time, and had no idea what was happening in New York with any software or anyone I had known.  I sent e-mail for the first time to Prof. Michael O'Rourke, in the Computer Graphics Dept., in 1998, regarding work and money.  I got an answer back - " I don't have any money for you".  There was never any mention of Maya software or anything regarding Alias/wavefront, Inc. by Pratt when I looked online on a public computer in the library in Clayton in 1997, 1998.  I did not know that Maya Video Products, Inc. had partnered with A/w and SGI and Pratt until 2003, when I received a Maya PLE software CD in the mail, showing Joaquin Margot, M.F.A., and Pratt classmate 1988-1990, on the cover.  I talked to a receptionist on the phone at A/w in Toronto, who told me she was sending me a Maya CD, and, I was like, kinda, "isn't that funny - I worked for a firm named Maya Video Products, Inc. in New York"  but, she didn't have any idea or what you know a person would have, see?  Funny. 

YOU KNOW.  WHAT'S FUNNY TODAY?   Get your head examined.  You don't know where the ax will land next.

I need a condo in Florida.  Does anyone have one REAL CHEAP?

I am a Registered Architect, and have a Master of Fine Arts (Computer Graphics)[and Interactive Media], am an Individual Real Estate Broker in Missouri, and have a National Council of Architectural Registration Boards certificate, since 1996, and record since 1983.
To clarify why I don't mention the names of the people who I worked with at Fru-Con Engineering, Inc., who were there on contract through Peak Technical Services, Pittsburgh, PA. - I didn't need to know them.  I was never introduced to them.  I knew their first names, at the time, and I may have heard their last names spoken.  I did not have any access to their time sheets, and, only their initials appeared on the drawings.  In fact, I was let go so suddenly that I left my time sheets there, at the office, in my file cabinet drawer, at my desk.  I did not get them back, and have never seen them.  One would think a company would want to forward property to an employee that has left, anything that has belonged to them.  Not Fru-Con.  They did not contact me nor talk to me about anything, and I have never heard mention of my time sheets or copies of my time sheets.  I was given two weeks severance pay, and, I called PDS (Piping Design Services, in Maryland Heights, Mo.) Technical Services and Mr. Jim O'Daniel, afterwards, who had placed me at Fru-Con.  I had thought that Jim O'Daniel was a P.E., for some reason, and, if he never was, this would be a significant lie to me.  I went to Peak Technical Services in Pittsburgh, after being let go from Fru-Con, and was placed at a company in Philadelphia, and told to stay in a hotel outside of the city.  While in Philadelphia, at the Kling Lindquist Partnership,  I earned the highest wages of my career, but, lost all of my savings, which was a couple of thousand dollars, staying in a hotel.  My wage went up without any reason, and, then, after being placed there with a man who had no education nor license, I was let go, and, told to wait for an interview with a firm in Boston.  I was at a hotel from mid-June to mid-July, costing thousands of dollars, since no discount given me by the hotel or Peak Technical Services.  This is before the resident hotel, even, was built around the country - which did happen, shortly afterwards.  This was before women worked on the road, and traveled in order to have work.  You know, this was when men were being sent to the Middle East, at high wages, on projects being built there, before 9/11.  I have never known any women Architects who were sent to the Middle East to work.  I have never known any women who were licensed and worked with software, in New York or in Philadelphia or anywhere. I saw a project being worked on in Philadelphia, and, happened to be around when the room was filled with employees coming in for work - all men.  Not a single woman.  You think they were all licensed and had N.C.A.R.B. certificates?  What do you need - a good reference, stating that you - although a  woman who knows what she's doing, wearing a skirt and nice clothes, with an education and licenses and certificates, can do the work - to get hired and stay employed?  In fact, I got to know the woman receptionist, who thought I was, even, an oddity.  I'm not mentally ill.   I'm just doing my work, under the highly thought-of N.C.A.R.B.  Now, what is the N.C.A.R.B. going to have to do me over for next?  I NEED MONEY.   There's no Christmas here, and hasn't been for years, and, I know, the year is 2012.   I didn't think I would need my own Attorney's license.  Why put that on me, too?  I just can't keep up, and, my skirts are getting to look more and more the same, over the years.  What's the name they have now?  Can someone post the guy's name and bio?  Let me know he's coming?  Let me know where I was just was and what's going?  You have a way. 

 http://www.klingstubbins.com/

Stubbins Associates Inc.  

Address:
1030 Massachusetts Ave., Ste. 4
Cambridge, MA 02138-5335
United States
Phone:
(617) 491-6450
Fax:
(617) 491-7104